Amana A8RXNGMWB01 user manual download (Page 4 of 40)

Languages: English
Pages:40
You can view the full version and download it in PDF format.
Page 4 of 40
INSTALLATION
INSTRUCTIONS
Excessive
Weight
Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other
injury.
Remove the Packaging
Remove
tape and glue residue from surfaces
before turning
on the refrigerator.
Rub a small amount
of liquid dish soap
over the adhesive
with your fingers.
Wipe with warm water
and dry.
Do not use sharp
instruments,
rubbing
alcohol,
flammable
fluids,
or abrasive
cleaners to remove tape or glue. These
products
can damage
the surface of your refrigerator.
For
more information,
see "Refrigerator
Safety."
On some models,
shelves,
bins, door shelf rails, and other
feature
parts may be packaged
in the Interior FeaturePak.
Follow
the instructions
contained
in the package
for proper
assembly.
There are four bolts that secure the refrigerator
to the
shipping
case. Keep these bolts because they are the
refrigerator's
leveling
legs.
Dispose
of/recycle
all packaging
materials.
IMPORTANT:
Do not remove
the white foam air return
insert that
is located
behind the control
panel on the ceiling of the
refrigerator
(on some models). The insert is part of the refrigerator
and not part of the packing
material.
If the insert is removed,
ice
may migrate
down
from the freezer and cause icicles to form.
When
IVlovingYour
Refrigerator:
Your refrigerator
is heavy. When moving the refrigerator
for cleaning
or service,
be sure to protect
the floor.
Always
pull the refrigerator
straight out when moving
it.
Do not wiggle
or "walk"
the refrigerator
when trying to move
it, as floor damage
could
occur.
Clean
Before
Using
After you remove all of the package materials,
clean the inside of
your refrigerator
before using it. See the cleaning
instructions
in
"Refrigerator
Care."
important
information
to know
about
glass
shelves
and
covers:
Do not clean glass shelves
or covers
with warm water when
they are cold. Shelves and covers may break if exposed
to
sudden temperature
changes
or impact,
such as bumping.
For your protection,
tempered
glass is designed
to shatter
into many small, pebble-size
pieces. This is normal.
Glass
shelves
and covers
are heavy. Use special
care when
removing
them to avoid
impact from
dropping.
Explosion
Hazard
Keep flammable
materials
and
vapors,
such
as
gasoline,
away from
refrigerator.
Failure
to do
so can
result
in
death,
explosion,
or fire.
To ensure proper
ventilation
for your refrigerator,
allow
for a 1/2"
(12.70 mm) space on each side. Allow 3" (7.5 cm) of space
between
overhead cabinets
and refrigerator
top. Allow
at least 1"
(25.40 mm) between
back of cabinet
and the wall. If your
refrigerator
has an ice maker, make sure you leave some extra
space at the back for the water
line connections.
If you are installing
your refrigerator
next to a fixed wall, leave
2" (5.08 cm) minimum
on the hinge side (depending
on your
model) to allow for the door to swing open.
Level the refrigerator.
See "Adjust
the Doors."
NOTE:
It is recommended
that you do not install the refrigerator
near an oven, radiator, or other heat source. Do not install in a
location
where the temperature
will fall below 55°F (13°C).
2"
(5.08
era)
Sample