Epson BrightLink 425Wi user manual download (Page 44 of 238)

Languages: English
Pages:238
You can view the full version and download it in PDF format.
Page 44 of 238
Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
Note:
To use the interactive pens with your projected computer image, you need to connect the USB
cable from the interactive module to your computer, even if you are projecting through the network.
Wired Network Projection
Wireless Network Projection
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Crestron RoomView Support
Wired Network Projection
You can send images to your projector through a wired network. To do this, you connect the projector to
your network, and then set up your projector and computer for network projection.
After connecting and setting up the projector as described here, install the network software from the
Epson Projector Software
CD-ROM on your computer. Use the following software and documentation to
set up, control, and monitor network projection:
°
EasyMP Network Projection
software sets up your computer for network projection. See the
EasyMP Network Projection Operation Guide
installed from your projector CD for instructions.
°
EasyMP Monitor
software (Windows only) lets you monitor and control your projector through the
network. You can download the latest software and documentation from the Epson web site. Go to
www.epson.com/support
(U.S.) or
www.epson.ca/support
(Canada) and select your projector.
Note:
If your projector is connected via a LAN cable to a network that includes a wireless access point,
you can connect to the projector wirelessly using the EasyMP Network Projection software.
Connecting to a Wired Network
Selecting Wired Network Settings
Parent topic:
Using the Projector on a Network
44
Sample