HP Color LaserJet 3000 user manual download (Page 70 of 226)

Languages: English
Pages:226
You can view the full version and download it in PDF format.
Page 70 of 226
1
2
3
4
X
Y
1
Page length (Y dimension)
2
Page width (X dimension)
3
Media length guides
4
Media width guides
Use the following procedure to configure a tray for a custom size. Once a custom size is set for a tray,
it will be retained until the media length guides are reset.
Setting a custom size in tray 2 or tray 3
1.
Open the tray and place the media face-up in the tray.
2.
Set the media length guides to the appropriate non-standard position and close the tray.
3.
When the tray configuration message appears, press
.
4.
Press
to change
ANY CUSTOM
to
CUSTOM
, and then press
.
5.
Press
or
to highlight the correct unit (either millimeters or inches), and then press
.
After the unit of measure is set properly, set the X dimension as follows:
6.
Press
or
to highlight the correct value, and then press
.
If the value entered is outside the valid range,
Invalid value
appears for two seconds. The control-
panel display prompts you to enter another value.
After the X dimension is set properly, set the Y dimension as follows:
7.
Press
or
to highlight the correct value, and then press
.
If the value entered is outside the valid range,
Invalid value
appears for two seconds. The control-
panel display prompts you to enter another value. The printer shows a message indicating the
dimensions for the custom size.
Printing from tray 1 (multipurpose tray)
Tray 1 is a multipurpose tray that holds up to 100 sheets of paper or 10 envelopes. It provides a
convenient way to print envelopes, transparencies, custom-size paper, or other types of paper without
having to unload the other trays.
56
Chapter 4
Printing tasks
ENWW
Sample