HP Color LaserJet 3000 user manual download

You can view the full version and download it in PDF format.
Page 48 of 226
Changing printer control-panel configuration settings
Use the printer control panel to make changes to default printer configuration settings, such as tray size
and type, sleep delay time, printer personality (language), and jam recovery.
You can also gain access to the printer control panel from a computer by using the
Settings
page of
the embedded Web server. The computer shows the same information as the control panel. For more
information, see
Using the embedded Web server
.
CAUTION
Configuration settings seldom need to be changed. Hewlett-Packard Company
recommends that only the system administrator change configuration settings.
Tray Behavior menu options
The
TRAY BEHAVIOR
menu provides the following user-defined options:
USE REQUESTED TRAY
: Select
EXCLUSIVELY
(the default value) to ensure that the printer will
not automatically select another tray when you indicate that a specific tray should be used.
Select
FIRST
to allow the printer to pull from a second tray if the specified tray is empty or contains
a different media type or size.
MANUALLY FEED PROMPT
: If you select
ALWAYS
(the default value), the system always
generates a prompt before pulling from the multipurpose tray. If you select
UNLESS LOADED
, the
system generates the prompt only if the multipurpose tray is empty or if it is configured for a different
type or size.
PS DEFER MEDIA
: If you select
ENABLED
(the default value), the printer uses HP's paper-
selection process. Select
DISABLED
to allow the printer to use the Adobe paper-selection process.
USE ANOTHER TRAY
. If you select
ENABLED
(the default value), the printer prompts users to
use another tray when the selected tray is unavailable. If you select
DISABLED
, the printer does
not prompt the user.
SIZE/TYPE PROMPT
. If you select
DISPLAY
(the default value), the printer prompts users to
confirm the media size or type loaded in the tray immediately after the tray has been loaded. If you
select
DO NOT DISPLAY
, the printer does not prompt the user.
DUPLEX BLANK PAGES
. If you select
AUTO
(the default value), the printer might not flip pages
in the duplexer for blank pages, which enhances printer performance. If you select
YES
, the printer
duplexer flips each page.
To set the Use Requested Tray feature
1.
Press
Menu
.
2.
Press
to highlight
CONFIGURE DEVICE
, and then press
.
3.
Press
to highlight
SYSTEM SETUP
, and then press
.
4.
Press
to highlight
TRAY BEHAVIOR
, and then press
.
5.
Press
to select
USE REQUESTED TRAY
.
6.
Press
or
to select
EXCLUSIVELY
or
FIRST
.
7.
Press
to save the selected behavior, and then press
Menu
to return to the
Ready
state.
34
Chapter 2
Control panel
ENWW
Sample