Ask. Download. Be answered.
Haier BWC40 user manual download (Page 6 of 38)
Confirm that you are not a robot.
PDF, 712.52 KB
You can view the full version and download it in PDF format.
Page 6 of 38
• Make sure there is a suitable power outlet (115 volts, 15 amps
outlet) with proper grounding to power the wine cellar.
• Avoid the use of three prong adapters or cutting off the third
grounding prong in order to accommodate a two prong outlet. This is
a dangerous practice since it provides no effective grounding for the
wine cellar and may result in shock hazard.
• Do not install your wine
cellar in any location not properly insulated
or heated (e.g., garage etc.). Your wine
cellar was not designed to
operate in temperature settings below 55˚ Fahrenheit.
• Select a suitable location for the wine
cellar on a hard even surface
away from direct sunlight or heat source (e.g., radiators,
baseboard heaters, cooking appliances, etc.). Any floor unevenness
should be corrected with the leveling legs located on the front and
rear bottom corners of the wine cellar.
• Your wine
cellar is designed for freestanding installation only. It is not
designed for built-in application.
This unit is for indoor use only.
• Avoid the use of an extension cord because of potential safety
hazards under certain conditions. If it is necessary to use an extension
cord, use only a 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot outlet that will accept the plug. The marked rating
of the extension cord must be equal to or greater than the electrical
rating of the appliance.
Use of Extension Cord
ELECTRICAL REQUIREMENT - SHOCK HAZARD
Ctrl + ←
Ctrl + →
This manual is suitable for devices