Motorola SB5100 user manual download (Page 49 of 74)

Languages: English
Pages:74
You can view the full version and download it in PDF format.
Page 49 of 74
43
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
43
SB5100 Series Cable Modem User Guide
X
Home
Print
Exit
Cannot send or receive data
Check the lights on the front panel. Note the first light from top to bottom that is off. This light indicates where
the error occurred as described in
“Front-Panel Lights and Error Conditions”
on page 44.
If all lights are off except the Standby light, the cable modem is in Standby mode. Press the Standby button to
reconnect your Internet service.
If you have cable TV, check that your TV is working and the picture is clear. If you cannot receive your regular
TV channels, your data service will not function.
Check the coaxial cable at the cable modem and wall outlet. Hand-tighten if necessary.
Check the IP address. Follow the steps in
“Verifying the IP Address in Windows 95, Windows 98, or Windows
Me”
on page 37 or
“Verifying the IP Address in Windows 2000 or Windows XP”
on page 38. Call your cable
service provider if you need an IP address.
Check that the USB or Ethernet cable is properly connected to the
cable modem
and your computer.
Problems related to unsuccessful
USB driver installation
Remove the USB driver. Follow the instructions in
one
of:
“Removing the USB Driver from Windows 98 or Windows Me”
on page 45
“Removing the USB Driver from Windows 2000”
on page 49
“Removing the USB Driver from Windows XP”
on page 54
Problem
Possible Solutions
Sample
This manual is suitable for devices