You can view the full version and download it in PDF format.
Page 5 of 71
ADSL Standards supported
Compliant to ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless
ADSL2), G.992.5 (ADSL2+) for Annex A, B
G.lite (G.992.2) with line rate support of up to 1.5Mbps downstream and 512Kbps upstream
Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1(for
ISDN only); G.991.1;G.lite (G992.2))
Supports OAM F4/F5 loop-back, AIS and RDI OAM cells
ATM Forum UNI 3.1/4.0 PVC
Supports up to 8 PVCs (UBR, CBR, VBR)
Multiple Protocols over AAL5 (RFC 1483)
PPP over AAL5 (RFC 2364)
PPP over Ethernet (RFC 2516)
Wireless Ethernet 802.11n
With built-in 802.11n access point for extending the communication media to WLAN
while providing the WEP, WPA and WPS for securing your wireless networks.
Network Address Translation (NAT)
Network Address Translation (NAT) allows the translation of an Internet protocol address used within
one network (for example a private IP address used in a local network) to a different IP address known
within another network (for example a public IP address used on the Internet).
Universal Plug and Play (UPnP)
Using the standard TCP/IP protocol, the Hamlet Wireless ADSL2+ Router and other UPnP enabled
devices can dynamically join a network, obtain an IP address and convey its capabilities to other
devices on the network.
10/100M Auto-negotiation Ethernet / Fast Ethernet Interface
This auto-negotiation feature allows the Router to detect the speed of incoming transmissions and
adjust appropriately without manual intervention. It allows data transfer of either 10 Mbps or 100 Mbps
in either half-duplex or full-duplex mode depending on your Ethernet network.
Dynamic DNS Support
With Dynamic DNS support, you can have a static hostname alias for a dynamic IP address.
Multiple PVC (Permanent Virtual Circuits) Support
Your Wireless ADSL2+ Router supports up to 8 PVC’s.
DHCP (Dynamic Host Configuration Protocol) allows individual clients (computers) to obtain TCP/IP
configuration at start-up from a centralized DHCP server. The 802.11n Wireless ADSL2+ Router has
built-in DHCP server capability enabled by default. It can assign IP addresses, an IP default gateway
and DNS servers to DHCP clients. The 802.11n Wireless ADSL2+ Router can now also act as a
surrogate DHCP server (DHCP Relay) where it relays IP address assignment from the actual real
DHCP server to the clients.
This manual is suitable for devices