Hamlet HRDSL300N user manual download (Page 32 of 71)

Languages: English
Pages:71
You can view the full version and download it in PDF format.
Page 32 of 71
Wireless ADSL2
+
Router
HRDSL300N
User Manual
32
Access Point Settings
• Access Point:
Default setting is set to
Activated
. If you do not have any wireless, both 802.11g,
802.11b and 802.11n, device in your network, select
Deactived
.
• Channel ID:
The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a
channel. Select a channel from the drop-down list box.
• Beacon interval:
The Beacon Interval value indicates the frequency interval of the beacon. Enter a
value between 20 and 1000. A beacon is a packet broadcast by the Router to synchronize the wireless
network.
• RTS/CTS Threshold:
The RTS (Request To Send) threshold (number of bytes) for enabling
RTS/CTS handshake. Data with its frame size larger than this value will perform the RTS/CTS
handshake. Setting this attribute to be larger than the maximum MSDU (MAC service data unit) size
turns off the RTS/CTS handshake. Setting this attribute to zero turns on the RTS/CTS handshake Enter
a value between 1500 and 2347..
• Fragmentation Threshold:
The threshold (number of bytes) for the fragmentation boundary for
directed messages. It is the maximum data fragment size that can be sent. Enter a value between 256
and 2346.
• DTM:
This value, between 1 and 255, indicates the interval of the Delivery Traffic Indication Message
(DTIM).
• Wireless Mode:
The default setting is
802.11b+g+n
(Mixed mode). If you do not know or have both
11g and 11b devices in your network, then keep the default in mixed mode. From the drop-down
manual, you can select 802.11g if you have only 11g card. If you have only 11b card, then select
802.11b and if you only have 802.11n then select 802.11n.
11n Settings
• Channel Bandwidth:
Select either 20 MHz or 20/40 MHz for the channel bandwidth. The higher the
bandwidth the better the performance will be.
• Guard Interval:
Select either 400nsec or 800nsec for the guard interval. The guard interval is here to
ensure that data transmission do not interfere with each other, it also prevents propagation delays,
echoing and reflections.
• MCS:
There are options 0~15 and AUTO to select for the
Modulation and Coding Scheme
. We
recommend users selecting AUTO.
Sample
This manual is suitable for devices