Hamlet HRDSL300N user manual download (Page 28 of 71)

Languages: English
Pages:71
You can view the full version and download it in PDF format.
Page 28 of 71
Wireless ADSL2
+
Router
HRDSL300N
User Manual
28
subnet mask assigned to you by your ISP (if given).
• Gateway:
You must specify a gateway IP address (supplied by your ISP) when you use 1483 Bridged
IP in the Encapsulation field in the previous screen.
• NAT:
Select this option to Activate/Deactivated the NAT (Network Address Translation) function for
this VC. The NAT function can be activated or deactivated per PVC basis
• Default Route:
if enable this function, the current PVC will be the default gateway to internet from this
device
• TCP M
TU Option:
Enter the TCP maximum transmission unit (MTU)
Dynamic Route:
The dynamic routing feature of the router can be used to allow the router to
automatically adjust to physical changes in the network's layout. The router uses the dynamic RIP
protocol. It determines the route that the network packets take based on the fewest number of hops
between the source and the destination. The RIP protocol regularly broadcasts routing information to
other routers on the network
.
• RIP Version:
(Routing Information protocol) Select this option to specify the RIP version, including
RIP-1, RIP-2M and RIP-2B. RIP-2M and RIP-2B are both sent in RIP-2 format; the difference is that
RIP-2M using Multicast and RIP-2 using Broadcast format
• RIP Direction:
Select this option to specify the RIP direction. None is for disabling the RIP function.
Both means the ADSL Router will periodically send routing information and accept routing information
then incorporate into routing table. IN only means the ADLS router will only accept but will not send RIP
packet. OUT only means the ADLS router will only send but will not accept RIP packet.
• Multicast:
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish
membership in a Multicast group - it is not used to carry user data. The Hamlet HRDSL150W supports
both IGMP version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
Sample
This manual is suitable for devices