Hamlet HNWS108 user manual download (Page 9 of 77)

Languages: English
Pages:77
You can view the full version and download it in PDF format.
Page 9 of 77
HNWS108
108M Wireless Router User Guide
-
6
-
Chapter 3. Connecting the Router
3.1. System Requirements
¾
Broadband Internet Access Service (DSL/Cable/Ethernet)
¾
One DSL/Cable modem that has an RJ45 connector (you do not need it if you
connect the router to the Ethernet)
¾
Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with
RJ45 connectors
¾
TCP/IP protocol must be installed on each PC
¾
Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator
6.0 or later
3.2. Installation Environment Requirements
¾
Do not place in direct sunlight or near a heater or heating vent
¾
Do not cluttered or crowded. There should be at least 2 inches (5 cm) of clear
space on all sides of the router
¾
Well ventilated (especially if it is in a closet)
¾
Operating temperature: 0
~40
(32
~104
)
¾
Operating Humidity: 10%~90%RH, Non-condensing
3.3. Connecting the Router
Before you install the router, you should connect your PC to the Internet through your
broadband service successfully. If there is any problem, please contact your ISP. After
that, please install the router according to the following steps. Don't forget to pull out the
power plug and keep your hands dry.
1.
Power off your PC, Cable/DSL modem, and the router.
2.
Locate an optimum location for the router. The best place is usually near the center
of the area in which your PC will wirelessly connect. The place must accord with the
Installation Environment Requirements.
.
3.
Adjust the direction of the antenna. Normally, upright is a good direction.
4.
Connect the PCs and each Switch/Hub in your LAN to the LAN Ports on the router,.
(If you have the wireless NIC and want to use wireless connector, you can skip this
step.)
5.
Connect the DSL/Cable Modem to the WAN port on the router.
6.
Connect the AC power adapter to the AC power socket on the router, and the other
end into an electrical outlet. The router will start to work automatically.
7.
Power on your PC and Cable/DSL modem.
Sample
This manual is suitable for devices