Hamlet HNWS108 user manual download

For Devices:Hamlet HNWS108
Languages:English
Pages:77
You can view the full version and download it in PDF format.
Page 52 of 77
HNWS108
108M Wireless Router User Guide
-
49
-
5.8.5. Remote Management
You can configure the Remote Management function on this page shown in figure 5-39.
This feature allows you to manage your Router from a remote location, via the Internet.
Figure 5-39
Remote Management
¾
Web Management Port
-
Web browser access normally uses the standard HTTP
service port 80. This router’s default remote management web port number is 80.
For greater security, you can change the remote management web interface to a
custom port by entering that number in this box provided. Choose a number
between 1024 and 65534, but do not use the number of any common service port.
¾
Remote Management IP Address -
This is the current address you will use when
accessing your router from the Internet. The default IP Address is 0.0.0.0. It
means this function is disabled. To enable this function, change the default IP
Address to another IP Address as desired.
To access the router, you will type your router's WAN IP Address into your browser's
Address (in IE) or Location (in Navigator) box, followed by a colon and the custom
port number. For example, if your Router's WAN address is 202.96.12.8 and you use
port number 8080, enter in your browser:
. You will be asked
for the router's password. After successfully entering the password, you will be able to
access the router's web-based utility.
Note:
Be sure to change the router's default password to a very secure password
.
5.8.6. Advanced Security
Using Advanced Security page (shown in figure 5-40), you can protect the router from
being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood from LAN.
Sample