You can view the full version and download it in PDF format.
Page 32 of 77
108M Wireless Router User Guide
: Some regions may not use
since the operation for the
wireless interface in 108Mbps Mode is illegal. Limited by local law regulations,
version for North America does not have region selection option.
This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems
with another nearby access point.
Select the desired wireless mode. The options are:
108Mbps (Dynamic) -
, 802.11g and 802.11b wireless stations can
connect to the router.
108Mbps (Static) -
Only Super G
wireless stations can connect to the router.
54Mbps (802.11g) -
Both 802.11g and 802.11b wireless stations can connect
to the router.
11Mbps (802.11b) -
Only 802.11b wireless stations can connect to the router.
: The default is "54Mbps (802.11g)", which allows both 802.11g and 802.11b
wireless stations to connect to the router.
Enable Wireless Router Radio -
The wireless radio of this Router can be enabled
or disabled to allow wireless stations access. If enabled, wireless stations will be
able to access the router, otherwise, wireless stations will not be able to access.
Enable SSID Broadcast -
If you select the
Enable SSID Broadcast
the Wireless Router SSID will broadcast its name (SSID) on the air.
Enable Wireless Security
– The wireless security function can be enabled or
disabled. If disabled, the wireless stations will be able to connect the router without
encryption. It is recommended strongly that you choose this option to encrypt your
wireless network. The encryption settings described below.
Authentication Type -
You can select one of the following authentication types:
Select WEP authentication type based on
Select WPA/WPA2 authentication type based on pre-
WPA /WPA2 -
Select WPA/WPA2 authentication type based on Radius Server.
Authentication Options -
You can select one of the following authentication
When you select
for authentication type you can select the following
Select Shared Key or Open System authentication type
automatically based on the wireless station request.
Shared Key -
Select 802.11 Shared Key authentication.