Hamlet HNWS108 user manual download

For Devices:Hamlet HNWS108
Languages:English
Pages:77
You can view the full version and download it in PDF format.
Page 22 of 77
HNWS108
108M Wireless Router User Guide
-
19
-
time in minutes that you wish to have the Internet connecting last unless a new link
is requested.
Caution
: Sometimes the connection cannot be disconnected although you specify a
time to Max Idle Time, since some applications are visiting the Internet continually in
the background.
Click the
Connect
button to connect immediately, Click the
Disconnect
button to
disconnect immediately.
Click the
Advanced Settings
button to set up the advanced option, the page
shown in figure 5-7 will then appear:
Figure 5-7
PPPoE Advanced Settings
¾
Packet MTU -
The default MTU size is 1492 bytes, which value is usually fine. For
some ISPs, you need modify the MTU. This should not be done unless you are
sure it is necessary for your ISP.
¾
Service Name/AC Name -
The service name and AC (Access Concentrator) name,
these should not be configured unless you are sure it is necessary for your ISP.
¾
ISP Specified IP Address -
If you know that your ISP does not automatically
transmit your IP address to the router during login, click “
Use the IP Address
specified by ISP
” check box and enter the IP Address in dotted-decimal notation,
which your ISP provided.
¾
Detect Online Interval -
The default value is 0, you can input the value between 0
and 120. The router will detect Access Concentrator online at every interval
between seconds. If the value is 0,
it
means, do not detect.
¾
DNS IP address -
If you know that your ISP does not automatically transmit DNS
addresses to the router during login, click “
Use the following DNS servers
checkbox and enter the IP address in dotted-decimal notation of your ISP’s primary
DNS server. If a secondary DNS server address is available, enter it as well.
Sample