Jetway 939GT4 user manual download (Page 34 of 64)

Languages: English
Pages:64
You can view the full version and download it in PDF format.
Page 34 of 64
31
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.”
To
operate the onboard parallel port in the EPP modes simultaneously, choose “EPP.”
By
choosing “ECP”, the onboard parallel port will operate in ECP mode only.
Choosing
“ECP+EPP” will allow the onboard parallel port to support both the ECP and EPP modes
simultaneously.
The ECP mode has to use the DMA channel, so choose the onboard parallel
port with the ECP feature.
After selecting it, the following message will appear: “ECP Mode
Use DMA” at this time, the user can choose between DMA channels 3 to 1.
The onboard
parallel port is EPP Spec. compliant, so after the user chooses the onboard parallel port with
the EPP function, the following message will be displayed on the screen: “EPP Mode Select.”
At this time either EPP 1.7 spec. or EPP 1.9 spec. can be chosen.
3-8
Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI Function
Enabled
ACPI Suspend Type
S1(POS)
Power Managerment
User Define
Video off Method
V/H SYNC+Blank
HDDD Power Down
Disabled
Power Button Function
Instant-Off
Power After Power Failure
Always Off
AMD K8 Cool’n’Quiet Control
Auto
Wake Up on PCI PME
Disabled
Wake-Up on Ring
Disabled
Wake-Up by Alarm
Disabled
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help
F5:Previous Values
F6:Optimized Defaults
F7:Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI).
The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked.
The choice are Suspend
off, All
Modes
Off, and Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS
(default)
Initial display power management signaling.
Blank Screen
This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Sample