Jetway 939GT4 user manual download (Page 27 of 64)

Languages: English
Pages:64
You can view the full version and download it in PDF format.
Page 27 of 64
24
Year
The year depends on the year of the BIOS.
Time
The time format is <hour><minute><second>.
IDE Channel 0 Master / Channel 0 Slave / Channel 1 Master / Channel 0 Slave
SATA Channel 1, 2, 3, 4
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type.
Note that the
specifications of your drive must match with the drive table.
The hard disk will not work
properly if you enter improper information for this category.
If the type of hard disk drives is
not matched or listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard.
This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be “None”.
If the controller of HDD interface is CD-ROM, the selection shall be “None”
Access Mode
The settings are Auto Normal, Large, and LBA.
Cylinder
number of cylinders
Head
number of heads
Precomp
write precomp
Landing Zone
landing zone
Sector
number of sectors
3-5
Advanced BIOS Features
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Item Help
Removable Device Priority
Press Enter
Hard Disk Boot Priority
Press Enter
Virus Warning
Disabled
L1 Cache
Enabled
L2 Cache
Enabled
Quick Power On Self Test
Enabled
SATA &SCSI Boot Order
SATA, SCSI
First Boot Device
Floppy
Second Boot Device
HDD-0
Third Boot Device
CDROM
Boot other Device
Enabled
Swap Floppy Drive
Disabled
Boot Up Floppy Seek
Enabled
Boot Up NumLock Status
On
Typematic Rate Setting
Disabled
Typematic Rate (Chars/Sec)
6
Typematic Delay (Msec)
250
Security Option
Setup
APIC Mode
Enabled
MPS Version Control For OS
1.4
OS Select For DRAM > 64MB
Non-OS2
HDD S.M.A.R.T. Capability
Disabled
Report No FDD For Windows
Yes
Small Logo (EPA) Show
Enabled
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help
F5:Previous Values
F6:Optimized Defaults
F7:Standard Defaults
Sample