Jetway 915GCP user manual download

For Devices:Jetway 915GCP   and 1 more
Languages:English
Pages:53
You can view the full version and download it in PDF format.
Page 45 of 53
42
3-11
Miscellaneous Control
This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Miscellaneous Control
Item Help
CPU Clock Ratio
8 X
Auto Detect PCI/DIMM Clk
Enabled
Spread Spectrum
Disabled
HOST Clock at Next Boot is
100MHz
DRAM Clock at Next Boot is
Auto
CPU Vcore Select
Default
VDD1.5 Select
1.5V
VRAM Settings
2.6V
VRAM Under Voltage Protect
Disabled
VDD1.5V Under Voltage Protect
Disabled
Flash Part Write Protect
Enabled
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help
F5:Previous Values
F6:Optimized Defaults
F7:Standard Defaults
Auto Detect PCI/DIMM Clk
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 533MHz CPU---133MHz~350MHz, 800MHz CPU---200MHz~350MHz
DRAM Clock at Next Boot is
This item allows you select the DRAM Clock for DDR266/DDR333/DDR400. The setting are:
DDR333 for P4/533MHz CPU, DDR333 /DDR400 for P4/800MHz CPU
CPU Vcore Select
This item allows you select CPU Vcore Voltage by increase 0.0125V step by step from
0.8375V to 1.6V or the Default setting is Default (CPU manufacturer Default setting).
VDD1.5 Select
This item allows you to select 1.5V of the AGP VGA card. The choice are: Default, 1.5V,
1.6V, 1.7V, 1.8V.
VRAM Settings
This item allows you to select DRAM Voltage.
The choice are: 2.55V/2.6V/2.7V/2.8V
Flash Part Write Protect
This item allows you protect your BIOS chip from Virus destroy data. When Flash BIOS you
have Disabled this item.
Sample