Jetway 915GCP user manual download

For Devices:Jetway 915GCP   and 1 more
Languages:English
Pages:53
You can view the full version and download it in PDF format.
Page 41 of 53
38
3-8
Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Power Management Setup
Item Help
ACPI Function
Enabled
ACPI Suspend Type
S1(POS)
Power Management
User Define
Video off Method
V/H SYNC+Blank
Video Off In Suspend
Yes
Suspend Type
Stop Grant
MODEM Use IRQ
3
Suspend Mode
Disabled
HDD Power Down
Disabled
Soft-off by PWR-BTTN
Instant-off
Wake-Up by PCI card
Disabled
Power On by Ring
Disabled
Resume by Alarm
Disabled
X Date (of Month)
0
X Time (hh:mm:ss)
0 : 0 :0
> PM Timer Reload Events
Press Enter
> PCI Express PM Function
Press Enter
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help
F5:Previous Values
F6:Optimized Defaults
F7:Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI).
The settings are Enabled and Disabled.
ACPI Suspend Type
This item allows you to select ACPI Suspend Type.
The setting are: S1(POS), S3(STR)
Video Off in Suspend
This determines the manner in which the monitor is blanked.
The choice are Yes
Video will
off , and No
Video always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS
(default)
Initial display power management signaling.
Blank Screen
This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state.
The settings are: Delay 4 Sec, Instant-Off.
Wake-Up by PCI card /Power On by Ring
During Disabled, the system will ignore any incoming call from the PCI card/modem. During
Enabled, the system will boot up if there’s an incoming call from the PCI card /modem.
Sample