Jetway 915GCP user manual download

For Devices:Jetway 915GCP   and 1 more
Languages:English
Pages:53
You can view the full version and download it in PDF format.
Page 39 of 53
36
OnChip IDE Primary/Secondary
The integrated peripheral controller contains an IDE interface with support for two IDE channels.
Select
Enabled
to activate each channel separately.
The settings are: Enabled and Disabled.
Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the
four IDE devices that the onboard IDE interface supports.
Modes 0 through 4 provide
successively increased performance. In Auto mode, the system automatically determines the best
mode for each device.
The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver).
If your hard drive and your system software both support Ultra DMA/33 and Ultra
DMA/66, select Auto to enable BIOS support.
The settings are: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write.
If
your IDE hard drive supports block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector the drive can support.
The
settings are: Enabled, Disabled.
3-7-2
Onboard Device Function
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Onboard Device Function
Item Help
RealTek LAN Function
Enabled
RealTek LAN BootROM
Disabled
USB Host Controller
Enabled
USB 2.0 Function
Enabled
USB Keyboard Legacy Support
Disabled
High Definition Audio
Enabled
Menu Level >>
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help
F5:Previous Values
F6:Optimized Defaults
F7:Standard Defaults
USB Host Controller
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller and you have
a USB peripherals.
The settings are: Enabled, Disabled.
USB Keyboard
Legacy Support
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller and you have
a USB keyboard.
The settings are: Enabled, Disabled.
High Definition Audio
This will determine which on Board Sound Chip Function will use.
The settings are: Enabled,
Disabled.
Sample