Jetway 915GCP user manual download

For Devices:Jetway 915GCP   and 1 more
Languages:English
Pages:53
You can view the full version and download it in PDF format.
Page 28 of 53
25
(5)
IDE Activity LED: IDE LED
This connector connects to the hard disk activity indicator light on the case.
(6)
Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your
computer without having to turn off your power switch.
This is a preferred method of
rebooting in order to prolong the lift of the system’s power supply.
See the figure
below.
(7)
Power switch: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the
system.
System Case Connections
HDLED
RESET
VCC5
GND
VCC5
PWR LED
PWRBTN
PWRBTN
PWRLED
HDDLE
RSTSW
NC
GND
JW FP
SPEAK
SPKR
GND
NC
VCC5
Pin 1
Pin 1
PWRLED
Pin 1
(8)
Wake On-LAN Headers (3-pin) :
WOL
This connector connects to a LAN card with a WAKE ON-LAN output.
This connector
power up the system when a wake up signal is received through the LAN card.
NOTE:
This feature requires that Wake On LAN or Ring In Wake up is enabled.
Wake-On-LAN Headers
WOL
1
3
5VSB
GND
WOL
(9)
FAN Power Headers: SYSFAN1, SYSFAN2 (3-pin), CPUFAN (4-pin)
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different.
The red wire should be positive,
while the black should be ground. Connect the fan’s plug to the board taking into
consideration the polarity of connector.
Sample