J&W JW-H61M-D3(B3) user manual download (Page 23 of 36)

Languages: English
Pages:36
You can view the full version and download it in PDF format.
Page 23 of 36
- 22 -
JW-H61M-D3
User's Manual
• Legacy USB Support
Setting support old input/output devices, such as the mouse, keyboard etc.
• EHCI Hand-off
Setting EHCI Hand-Off function.
• Port 60/64 Emulation
The item is to increase the USB KBC compatibility.
• USB transfer time-out
The time-out value for CONTROL, Bulk, and Interrupt transfers.
• Device reset time-out
USB mass storage device Start Unit command time-out.
• Device power-up delay
Maximum time the device will take before it properly reports itself to the Host Controller.
Press <
Esc
> key to return to "
Advanced
" menu.
Power Management
Click <Enter> key to enter its submenu.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends,Inc.
Advanced
Power Management
Power On By PS/2 Keyboard
Keyboard Password
Power On By PS/2 Mouse
AC Power Loss
[Disabled]
[Disabled]
[Power Off]
Power On By PS/2 Keyboard
: Select Screen
↑↓
:
Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F7: Previous Values
F8: Fail-Safe Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.02.1205. (C)Copyright 2010 American Megatrends, Inc.
• Power On By PS/2 Keyboard
When setting "Password", system can wake up with Password. When setting "AnyKey",
system can wake up with any key of keyboard. When setting "Disabled",system can't allow
wake up with Keyboard.
Note: if you set the password boot functions, the mainboard boot button will failure
.
• Power On By PS/2 Mouse
Set the mouse boot function.
• AC Power Loss
Setting the system state choice after powre failure. Setting "Power Off", need to press case
panel on the Power switch to boot. Setting "Power On", the supply reply directly boot.
Setting
"Last State", Power reply recovery system State before power off. The default value
as "Power Off".
Press <
Esc
> key to return to "
Advanced
" menu.
Note:
Don’t forget your password. If you forget the password, you will have to open the
computer case and clear all information in the CMOS before you can start up the
system. But by doing this, you will have to reset all previously set options.
Sample
This manual is suitable for devices