You can view the full version and download it in PDF format.
Page 26 of 28
- 2³ -
4.5.9 Exit setting
BIOS SETUP UTILITY
Exit system setup
after saving the
F10 key can be used
for this operation.
Go to Sub Screen
Save and Exit
Save Changes and Exit
Discard Changes and Exit
Load Optimal Defaults
Load Failsafe Defaults
v02.68 (C)Copyright 1985-2009, American Megatrends, Inc.
• Save Changes and Exit
Select "Save Changes and Exit", and press the Enter key, and select "Yes" button, so save
all settings the results to the CMOS RAM and exit BIOS setup program. If not stored, then
select "No" or Press "ESC" key and return to the "Save & Exit" menu.
• Discard Changes and Exit
Select "Discard changes and exit", select "Yes" and press <Enter> to give up on BIOS
program changes and exit BIOS setup program. Select "No" or press "ESC" and return to
the main menu.
• Discard Changes
Select "Discard Changes", select "Yes" and press <Enter> to discard the BIOS changes.
"No" or press "ESC" key and return to the main menu.
• Load Optimal Defaults
This option opens a dialog box that let you install optimized defaults for all appropriate items
in the Setup Utility. Select <OK> and then <Enter> to install the defaults. select <Cancel>
and then <Enter> to not install the defaults. The optimized defaults place demand on the
system that may be greater than the performance level of the components, such as the CPU
and the memory. You can cause fatal errors or instability if you install the optimized defaults
when your hardware does not support them. If you only want to install setup defaults for a
speciﬁc option, select and display that option, and then press <F9>.
• Load Failsafe Defaults
This option opens a dialog box that lets you install fail-safe defaults for all appropriate items
in the Setup Utility: Select <Ok> and the <Enter> to install the defaults. Select<Canel>
and then <Enter> to not install the defaults. The fail-safe defaults place no great demand
on the system and are generally stable. If your system is not functioning correctly, try
installing the fail-safe defaults as a ﬁrst step in getting your system working properly again.
If you only want to install fail-safe defaults for a speciﬁc option, select
and display that
and then press <F8>.
This manual is suitable for devices