J&W JW-D525M-GT user manual download (Page 24 of 28)

Languages: English
Pages:28
You can view the full version and download it in PDF format.
Page 24 of 28
- 2± -
JW-D525M-GT
User's Manual
4.5.6 Security Setting
This item allows you to
Chage Supervisor/User Password,
Type the password, up to eight
characters, and press <Enter>. The password typed now will clear any previously entered
password from CMOS memory. You will be asked toconfirm the password. Type the password
again and press <Enter>.
Note
:
Don’t forget your password. If you forget the password, you will have to
open the computer case and clear all information in the CMOS before you can start
up the system. But by doing this, you will have to reset all previously set options.
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Power
PC&Health
Exit
Security Settings
Install or Change the
password.
Select Screen
↑↓
Select Item
Enter
Change
F1
General Help
F10
Save and Exit
ESC
Exit
Supervisor Password : Not Installed
User Password
: Not Installed
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
Boot Sector Virus Protection
Flash Write Protection
[Full Access]
[Setup]
[Disabled]
[Disabled]
v02.68 (C)Copyright 1985-2009, American Megatrends, Inc.
Boot Sector Virus Protection
Uses this option, may prevent the change hard disk boot-sector (district table), thus prevents
the infection computer virus.
Flash Write Protection
The item is used to enable or disable the BIOS Flash Write Control for non-Award flash utility.
Select [Enabled] when performing BIOS update with the non-Award flash utility. Ignore this
option if you use the Award flash utility. Default value is [Disabled].
Sample
This manual is suitable for devices