J&W JW-D525M-GT user manual download (Page 18 of 28)

Languages: English
Pages:28
You can view the full version and download it in PDF format.
Page 18 of 28
- 1µ -
JW-D525M-GT
User's Manual
SATA1/2
This item sets the status of auto detection of SATA/IDE devices while enterting setup, and
BIOS will auto detects the presence of SATA/IDE devices. Press "Enter" Key to enter the
submenu.
Type
Auto detect IDE port device type;
LBA/Large Mode
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device
supports this mode, and if the device was not previously formatted with LBA mode disabled.
Block (Multi-Sector Transfer)
Enables or disables data multi-sectors transfers. When set to [Auto] , the data transfer from
and to the device occurs multiple sectors at a time if the device supports multi-sector transfer
frature. When set to [Disabled] , the data transfer from and to the device occurs one sector at
a time.
PIO Mode
Allows you to select the data transfer mode.
DMA Mode
Selects the DMA mode.
S.M.A.R.T
Set the Smart Monitoring, Analysis, and Reporting Technology.
32Bit Data Transfer
Enables or disables 32-bit data transfer.
BIOS SETUP UTILITY
Main
SATA1
Select the type
of device connected
to the system.
Select Screen
↑↓
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Device
:Hard Disk
Vendor
:ST380215AS
Size
:80.0GB
LBA Mode
:Supported
Block Mode:16Sectors
PIO Mode
:4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-6
S.M.A.R.T.:Supported
LBA/Large Mode
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO ModeL
DMA Mode
S.M.A.R.T
32Bit Data Transfer
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
v02.68 (C)Copyright 1985-2009, American Megatrends, Inc.
Sample
This manual is suitable for devices