Asrock X38TurboTwins-WiFi user manual download (Page 57 of 71)

Languages: English
Pages:71
You can view the full version and download it in PDF format.
Page 57 of 71
5 7
5 7
5 7
5 7
5 7
3.3.2
3.3.2
3.3.2
3.3.2
3.3.2Chipset Configuration
Chipset Configuration
Chipset Configuration
Chipset Configuration
Chipset Configuration
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration
options: [Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto]
is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[333MHz (DDR2 667)], [400MHz (DDR2 800)] or [533MHz (DDR2 1066)] for
DDR2 memory modules, or select [400MHz (DDR3 800)], [533MHz (DDR3
1066)], [667MHz (DDR3 1333)] or [800MHz (DDR3 1600)] for DDR3 memory
modules. The configuration options depend on the CPU and memory module
you adopt on this motherboard. Please refer to page 8 for the CPU FSB fre-
quency and its corresponding memory support frequency.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
DRAM tCL
Use this item to adjust the means of memory accessing. Configuration
options for DDR2 memory modules are [3], [4], [5], [6] and [Auto].
Configuration options for DDR3 memory modules are are [5], [6], [7], [8],
[9], [10], [11] and [Auto].
DRAM tRCD
This controls the latency between the DRAM active command and the
read / write command. Configuration options: [Auto], [3 DRAM Clocks] to
[15 DRAM Clocks].
DRAM tRP
This controls the idle clocks after a precharge command is issued.
Configuration options: [Auto], [3 DRAM Clocks] to [15 DRAM Clocks].
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Chipset Configuration
Memory Remap Feature
DRAM Frequency
Flexibility Option
DRAM tCL
DRAM tRCD
DRAM tRP
DRAM tRAS
DRAM Command Rate
[Auto]
[Disabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
Select Screen
Select Item
+ -
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
F9
Load Defaults
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Advanced
Primary Graphics Adapter
[PCI]
OnBoard HD Audio
Front Panel
OnBoard Lan
OnBoard 1394
[Auto]
[Auto]
[Enabled]
[Enabled]
CPU Voltage
DRAM Voltage
NB Core Voltage
[Auto]
[Auto]
[Auto]
Sample
This manual is suitable for devices