Asrock P45XE-WiFiN user manual download (Page 27 of 194)

You can view the full version and download it in PDF format.
Page 27 of 194
2 7
2 7
2 7
2 7
2 7
P45XE-WiFiN / P45XE-R / P45XE
Internal Audio Connectors
This connector allows you
(4-pin CD1)
to receive stereo audio input
(see p.2
No. 35 or p.3
No. 34)
from sound sources such as
tuner card, or MPEG card.
network (WLAN) adapter. It all-
ows you to create a wireless
environment and enjoy the
convenience of wireless net-
work connectivity.
Infrared Module Header
This header supports an
(5-pin IR1)
optional wireless transmitting
(see p.2
No. 26 or p.3
No. 25)
and receiving infrared module.
Front Panel Audio Header
This is an interface for front
(9-pin HD_AUDIO1)
panel audio cable that allows
(see p.2
No. 33 or p.3
No. 32)
convenient connection and
control of audio devices.
1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select
Chipset Configuration. Set the Front Panel Control option from
[Auto] to [Enabled].
F. Enter Windows system. Click the icon on the lower right hand
taskbar to enter Realtek HD Audio Manager.
For Windows
2000 / XP / XP 64-bit OS:
Click “Audio I/O”, select “Connector Settings”
, choose
“Disable front panel jack detection”, and save the change by
clicking “OK”.
This manual is suitable for devices