Asrock P45XE-WiFiN user manual download (Page 15 of 194)

Pages:194
You can view the full version and download it in PDF format.
Page 15 of 194
1 5
1 5
1 5
1 5
1 5
ASRock
P45XE-WiFiN / P45XE-R / P45XE
Motherboard
Step 1. Open the socket:
Step 1-1.
Disengaging the lever by depressing
down and out on the hook to clear
retention tab.
Step 1-2.
Rotate the load lever to fully open po-
sition at approximately 135 degrees.
Step 1-3.
Rotate the load plate to fully open po-
sition at approximately 100 degrees.
Step 2.
Insert the 775-LAND CPU:
Step 2-1.
Hold the CPU by the edges where are
marked with black lines.
Step 2-2.
Orient the CPU with IHS (Integrated
Heat Sink) up. Locate Pin1 and the two
orientation key notches.
For proper inserting, please ensure to match the two orientation key
notches of the CPU with the two alignment keys of the socket.
Step 2-3.
Carefully place the CPU into the socket
by using a purely vertical motion.
Step 2-4.
Verify that the CPU is within the socket
and properly mated to the orient keys.
Step 3.
Remove PnP Cap (Pick and Place Cap):
Use your left hand index finger and thumb to
support the load plate edge, engage PnP cap
with right hand thumb and peel the cap from the
socket while pressing on center of PnP cap to
assist in removal.
black
line
black
line
775-Pin Socket
Pin1
alignment
key
alignment
key
Pin1
orientation
key
notch
orientation
key
notch
775-LAND CPU
English
English
English
English
English
Sample
This manual is suitable for devices