Asrock G PRO user manual download (Page 9 of 25)

Languages: English
Pages:25
You can view the full version and download it in PDF format.
Page 9 of 25
9
Chapter 2 Installation
Chapter 2 Installation
Chapter 2 Installation
Chapter 2 Installation
Chapter 2 Installation
G Pro / GV Pro is a Micro ATX form factor (9.6" x 9.6", 24.4 x 24.4 cm) motherboard.
Before you install the motherboard, study the configuration of your chassis to en-
sure that the motherboard fits into it.
2.1
Screw Holes
2.1
Screw Holes
2.1
Screw Holes
2.1
Screw Holes
2.1
Screw Holes
2.2
Pre-installation Precautions
2.2
Pre-installation Precautions
2.2
Pre-installation Precautions
2.2
Pre-installation Precautions
2.2
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1.
Unplug the power cord from the wall socket before touching any component.
2.
To avoid damaging the motherboard components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use
a grounded wrist strap or touch a safety grounded object before you handle
components.
3.
Hold components by the edges and do not touch the ICs.
4.
Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.
2.3
CPU Installation
2.3
CPU Installation
2.3
CPU Installation
2.3
CPU Installation
2.3
CPU Installation
Step 1.
Unlock the socket by lifting the lever up to a 90
o
to 100
o
angle.
Step 2.
Position the CPU directly above the socket such that its marked corner
matches the base of the socket lever.
Step 3.
Carefully insert the CPU into the socket until it fits in place.
Make sure to unplug the power cord before installing or
removing the motherboard. Failure to do so may cause
physical injuries to you and damages to motherboard
components.
Place screws into the holes indicated by circles to secure the motherboard
to the chassis.
Do not over-tighten the screws!
Doing so may damage the
motherboard.
Sample
This manual is suitable for devices