Asrock G PRO user manual download (Page 18 of 25)

Languages: English
Pages:25
You can view the full version and download it in PDF format.
Page 18 of 25
1 8
1 8
1 8
1 8
1 8
[CD/DVD]:
This is used for IDE CD/DVD drives.
[ARMD]:
This is used for IDE ARMD (Accelerated RemovableMedia
Device), such as MO.
Cylinders
This is used to configure the number of cylinders.
Refer to the drive
documentation to determine the correct value.
Heads
This is used to configure the number of read/write heads.
Refer to
the drive documentation to determine the correct values.
Write Pre-compensation
Enter Write Pre-compensation sector.
Refer to the drive documentation to
determine the correct value.
Sectors
This is used to configure the number of sectors per track.
Refer to the
drive documentation to determine the correct value.
Maximum Capacity
This field shows the drive’s maximum capacity as calculated by the BIOS
based on the drive information you entered.
LBA Mode
This allows user to select the LBA mode for a hard disk > 512 MB under
DOS and Windows; for Netware and UNIX user, select [Off] to disable the
LBA mode.
Block Mode
Set the block mode to [On] will enhance hard disk performance by reading
or writing more data during each transfer.
Fast Programmed I/O Modes
This allows user to set the PIO mode to enhance hard disk performance by
optimizing the hard disk timing.
32 Bit Transfer Mode
It allows user to enable 32-bit access to maximize the IDE hard disk data
transfer rate.
Ultra DMA Mode
Ultra DMA capability allows improved transfer speeds and data integrity
for compatible IDE devices. Set to [Disabled] to suppress Ultra DMA
capability.
3.3 Advanced, Security, Power, Boot, and Exit Menus
3.3 Advanced, Security, Power, Boot, and Exit Menus
3.3 Advanced, Security, Power, Boot, and Exit Menus
3.3 Advanced, Security, Power, Boot, and Exit Menus
3.3 Advanced, Security, Power, Boot, and Exit Menus
Detailed descriptions of these menus are listed in the Appendix, see p.20.
Sample
This manual is suitable for devices