You can view the full version and download it in PDF format.
Page 8 of 43
FSB1066-CPU is supported only when you install AGP VGA card into AGP
slot. Besides, if you use a FSB1066-CPU on this motherboard, please
adopt a DDR400 CL2.5 memory module.
About the setting of
“Hyper Threading Technology”, please check page
This motherboard supports Untied Overclocking Technology. Please read “Un-
tied Overclocking Technology” on page 24 for details.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 16 for proper installation.
Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.
CPU FSB Frequency
Memory Support Frequency
When you use an FSB800-CPU on this motherboard, it will run at
DDR320 if you adopt a DDR333 memory module.
Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
Power Management for USB 2.0 works fine under Microsoft
XP SP1 or SP2 / 2000 SP4. It may not work properly under Microsoft
If you desire a faster, less restricted way of charging your Apple devices,
such as iPhone/iPod/iPad Touch, ASRock has prepared a wonderful
solution for you - ASRock APP Charger. Simply installing the APP Charger
driver, it makes your iPhone charged much quickly from your computer
and up to 40% faster than before. ASRock APP Charger allows you to
quickly charge many Apple devices simultaneously and even supports
continuous charging when your PC enters into Standby mode (S1),
hibernation mode (S4) or power off (S5). With APP Charger driver
installed, you can easily enjoy the marvelous charging experience than
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by