HP Compaq LA2405x user manual download (Page 15 of 27)

Languages: English
Pages:27
You can view the full version and download it in PDF format.
Page 15 of 27
NOTE:
When using the controls, you will obtain the best results by using the auto-adjustment
pattern software utility provided on the CD.
When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue
adjusting the values until the distortion disappears. To restore the factory settings, select
Yes
from
the
Factory Reset
menu in the on-screen display.
To eliminate vertical bars (Clock):
1.
Press the
Menu
button on the monitor's front panel to open the OSD Menu, and then select
Image Control
>
Clock
.
2.
Press the
+
(Plus) or
(Minus) buttons on the monitor's front panel to eliminate vertical bars.
Press the buttons slowly so that you do not miss the optimum adjustment point.
Figure 3-2
Clock Adjustment
3.
After adjusting the Clock, if blurring, flickering, or bars appear on the screen, proceed to adjust
the Clock Phase.
To remove flickering or blurring (Clock Phase):
1.
Press the
Menu
button on the monitor's front panel to open the OSD Menu, and then select
Image Control
>
Clock Phase
.
2.
Press the
+
(Plus) or
(Minus) buttons on the monitor's front panel to eliminate flickering or
blurring. Flicking or blurring may not be eliminated depending on your computer or graphics
controller card installed.
Figure 3-3
Clock Phase Adjustment
To correct screen position (Horizontal Position or Vertical Position):
1.
Press the
Menu
button on the monitor's front panel to open the OSD Menu, and then select
Image Control
>
Horizontal Position
and/or
Vertical Position
.
2.
Press the
+
(Plus) or
(Minus) buttons on the monitor's front panel to properly adjust the
position of the image in the display area of the monitor. The Horizontal Position shifts the image
left or right; the Vertical Position shifts the image up and down.
Figure 3-4
Horizontal or Vertical Position Adjustment
ENWW
Using and Adjusting the Monitor
9
Sample