Eizo HD2442W user manual download

For Devices:Eizo HD2442W
Languages:English
Pages:46
You can view the full version and download it in PDF format.
Page 35 of 46
Chapter 4
Reference
4-2
SpeciIcations
Panel
LCD Panel
24.1-inch (610 mm) TFT color LCD with anti-glare hard coating
Viewing angle: Vertical 178², Horizontal 178² (CR: 10 or more)
Dot Pitch
0.270 mm
Resolution
1920 dots × 1200 lines
Max. Display
Color
Approx. 16.77 million colors: Applicable to 8 bit (1064.33 million colors/10 bit-LUT)
Display Area
(H × V)
518.4 mm × 324.0 mm
PC Input Signal
Digital Input
Signal (PC 1)
Input Signal Connector
DVI-D × 1
Horizontal Scan Frequency
31.5 - 76 kHz: each preset signal ±1 kHz
Vertical Scan Frequency
59 - 61 Hz: each preset signal ±1 Hz
(VGA TEXT: 69 - 71 Hz)
(49 - 51 Hz is also available@720p/1080p
*
1
)
Max. Dot Clock
162 MHz
Signal Transmission System
TMDS (Single Link)
Analog Input
Signal (PC 2)
Input Signal Connector
D-Sub mini 15-pin × 1
Horizontal Scan Frequency
31.5 - 80 kHz: each preset signal ±1 kHz
Vertical Scan Frequency
55 - 76 Hz: each preset signal ±1 Hz
(49 - 51 Hz is also available@720p/1080p
*
1
)
Max. Dot Clock
162 MHz
Input Signal (Sync)
Separate, TTL, positive/negative
Input Signal (Video)
Analog, posItIve (0.7Vp-p/75Ω)
Video Signal Memory
50 (preset: 34)
Audio Input
USB communication
Plug and Play
VESA DDC2B
VIDEO Input
Signal
HDMI Input
Signal
*
2
(HDMI 1/2)
Input Signal Connector
HDMI Type A × 2
Applicable Format
Video signal
- 525i (480i)/525p (480p)/1125i (1080i)/750p (720p):
60 Hz, 1125p (1080p): 60 Hz/24 Hz
- 625i (576i)/625p (576p)/1125i (1080i)/750p (720p):
50 Hz, 1125p (1080p): 50 Hz/24 Hz
Audio signal
- 2ch linear PCM (32 kHz/44.1 kHz/48 kHz/
88.2 kHz/96 kHz/176.4 kHz/192 kHz)
Audio Output
Audio Output
Terminal
Ø3.5 stereo mini jack × 1
Headphone Jack
Ø3.5 stereo mini jack × 1
USB
Standard
USB SpecIicatIon RevIsIon 2.0
Port
Upstream port × 2, Downstream port × 2
Power Supply
100 - 120 VAC ±10%, 50/60 Hz, 1.1 A
200 - 240 VAC ±10%, 50/60 Hz, 0.55 A
Power
Consumption
Screen Display
On
110 W or less (with USB load)
100 W or less (without USB load)
Power-saving
mode
° When <Signal Detection> setting is set to “All Input Signals”:
7 W or less (at no input signal, without USB load)
° When <Signal Detection> setting is set to “Current Input Signal”:
2 W or less (at PC input signal selection, at no input signal, without USB load)
Power switch Off
1 W or less
Sample