Eizo HD2442W user manual download

For Devices:Eizo HD2442W
Languages:English
Pages:46
You can view the full version and download it in PDF format.
Page 32 of 46
32
Chapter 3
Troubleshooting
(HDMI Input Signal)
Problems
Possible cause and remedy
1.
No Picture
°
Power indicator does not light up.
°
Check whether the power cord is correctly connected.
°
Press
on the remote control or touch
of the
operation switch.
°
Power indicator lights in orange.
° Switch the input signal with [INPUT SELECT] (
) on
the remote control or
of the operation switch.
°
Turn on the AV equipment.
°
Power indicator lights in blue.
° Check whether the AV equipment is properly connected
to the monitor.
°
Switch the setting using the <Field Rate> in the <Monitor
Settings>.
2.
The message below appears.
These messages appear when the input signal is incorrect
even if the monitor is functioning.
• The frequency of the sIgnal Is outsIde the specIicatIon.
Example:
Conirm the dIgItal sIgnal format by referrIng to the
instruction manual of the equipment connected. (Refer to
page 35
.)
3.
The color shown on the display is not correct.
°
Change the color space of the video input signal using
<Color Space> in the <Monitor Settings> menu.
(Normally, select “Auto”.)
4.
The video images are out of control by the FF/REW
operation when a video equipment is connected to
the monitor.
°
The monitor mechanism causes the image out of control
status a little. This is not a malfunction.
±.
No sound/Volume control is not available.
°
Check whether the applicable format of the equipment
connected is correct.
Refer to
page 35
for the sound input format of the
monitor.
Sample