You can view the full version and download it in PDF format.
Page 3 of 74
Notice for this monitor
Notice for this monitor
This product is suited to general purposes like creating documents, viewing multimedia content.
This product has been adjusted speciIcally for use in the region to which it was originally shipped. ±f the product is
used outside the region, it may not operate as speciIed in the speciIcations.
This product may not be covered by warranty for uses other than those described in this manual.
The speciIcations noted in this manual are only applicable when the following are used:
· Power cords provided with the product
· Signal cables speciIed by us
Only use optional products manufactured or speciIed by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning” (page 4)
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a Ixed lifetime. When the screen becomes dark or begins to ²icker, please contact
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference
patterns, etc. ±f pressure is continually applied to the panel, it may deteriorate or damage your panel. (±f the pressure
marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt
to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. ±n that case, do not turn the monitor on. ±nstead wait until
the dew condensation disappears, otherwise it may cause some damage to the monitor.
This manual is suitable for devices