Eizo FS2333 user manual download (Page 29 of 74)

Languages: English
Pages:74
You can view the full version and download it in PDF format.
Page 29 of 74
29
Chapter 3 Setting Monitor
3-2. Switching sound source for HDMI signal input
This function allows you to switch sound source for HDM± signal input. You can select the HDM± or stereo mini
jack.
Procedure
1.
Choose “Sound” in the Setting menu, and press
.
2. Choose “Source” in the “Sound” menu, and press
.
The “Source” menu appears.
3.
Select “HDM±” or “Stereo Mini Jack” with
or
.
4. Press
to exit the adjustment.
Note
• This function is available with HDM± signal input. However, if a DV±-HDM± adapter cable is used, the sound source is
automatically “Stereo Mini Jack” and cannot be changed.
3-3. To adjust the sound level
The input sound level can be adjusted.
The volume difference may occur depending on the kinds of input signals, since the average sound level of the
external device differs.
Adjustable range
-1 to 1
Procedure
1.
Choose “Sound” in the Setting menu, and press
.
2. Choose “Sound Level” in the “Sound” menu, and press
.
The “Sound Level” menu appears.
3. Use
or
for adjustment.
4. Press
to exit the adjustment.
Attention
• This function is applicable to sound from the monitor speakers and headphones.
Note
• For example, if the volume difference of PC1 and PC2 input signals becomes large, you can reduce the volume
difference between them by raising the “Sound Level” of the lower volume side.
3-4. Enabling/Disabling DDC/CI communication
This function allows you to enable/disable the DDC/C± communication (see
“8-6. Glossary” (page 54)
).
Procedure
1.
Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “DDC/C±” in the “Monitor Settings” menu, and press
.
The “DDC/C±” menu appears.
3. Select “Enable” or “Disable” with
or
.
4. Press
to exit the adjustment.
Sample
This manual is suitable for devices