Eizo FS2333 user manual download

For Devices:Eizo FS2333
Languages:English
Pages:74
You can view the full version and download it in PDF format.
Page 23 of 74
23
Chapter 2 Adjusting Screens
2.
Prepare to use analog screen adjustment patterns.
Load the “E±ZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern Iles”.
Note
• For details and instructions on opening the “Screen adjustment pattern Iles”, refer to the Readme.txt Ile.
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
To adjust ²ickering, screen position, and screen size automatically
Procedure
1.
Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern Iles”.
2. Choose “Screen” in the Setting menu, and press
.
3.
Choose “Auto Screen Adjust” in the “Screen” menu, and press
.
4. Select “Yes” with
or
, and press
.
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
If the screen is not displayed correctly even after performing the auto adjustment, perform adjustments
according to the following procedure. If the screen is displayed correctly, go to
“5. Adjusting color gradation.”
(page 25)
.
4.
Choose “Screen” from the Setting menu to perform advanced adjustments.
Adjust the clock, phase and position, in this order.
To eliminate vertical bars
Procedure
1.
Choose “Clock” in the “Screen” menu, and press
.
The “Clock” menu appears.
2. Adjust the clock with
or
to eliminate vertical bars.
Press
or
slowly so as not to miss the adjustment point.
3. Press
to exit the adjustment.
When blurring, ²ickering or bars appear on the screen after adjustment, proceed to “Phase” to remove ²ickering or
blurring.
Sample