Daewoo AD-13 user manual download

Languages: English
Pages:1
You can view the full version and download it in PDF format.
Page 1 of 1
B
C
A
F
WARNING
CAUTION
INSTALLATION OF THIS PRODUCT
REQUIRES TWO PERSONS.
INSTALLATION INSTRUCTION
STEP 1. Cut the edges of the template at A,B and C, to
fit in the recessed bottom of the top
cabinet so that template will lie flat
against the top cabinet.
STEP 2. Drill 5/8" (15.875mm) diameter holes at
D and E.
Cut out 2" (76.2mm) diameter hole
for power cord at F
STEP 3. (Skip for horizontal exhaust installation)
Cut opening for vertical exhaust location.
STEP 5. Attach the filler blocks so that the holes
in each block line up with the corresponding
holes in the cabinet. The filler blocks should
be at the same levels as the bottom edge
of the top cabinet.
STEP 4. Remove the top cabinet template.
CAUTION -IIF EXHAUST ADAPTOR IS POSITIONED OUTSIDE
RECOMMENDED DIMENSION, GREASE LADEN AIR WILL
DISCHARGE INTO HOUSE STRUCTURE.
Electric Shock Hazard
Cut out this area of upper cabinet bottom
if venting through the roof.
CENTER LINE
install power supply cord
bushing around hole drilled
in metal cabinet.
Failure to follow these instructions
could result in electrical
shock or other personal injury.
WALL
WALL
D
Drill 5/8" (15.875mm) dia. hole
filler block
E
Drill 5/8" (15.875mm) dia. hole
use filler block when
cabinet bottom is
recessed
filler block
TOP CABINET TEMPLATE
ROOF–VENTING INSTALLATIONS
OUTSIDE EXHAUST(VERTICAL)
For metal cabinet, put the tape
on edge of hole to protect
power cord from damage
power supply cord hole
Cut out 2’’ dia. hole
filler blocks
center line
center line
Smooth flat bottom cabinet
Recessed bottom cabinet
Filler block
6.4 mm
0
1
/
4’’
6.4 mm
0
1
/
4’’
12.7 mm
0
1
/
2’’
12.7 mm
0
1
/
2’’
19.1 mm
0
3
/
4’’
19.1 mm
0
3
/
4’’
31.8 mm
1
1
/
4’’
31.8 mm
1
1
/
4’’
25.4 mm
1’’
6.4 mm
0
1
/
4’’
12.7 mm
0
1
/
2’’
19.1 mm
0
3
/
4’’
31.8 mm
1
1
/
4’’
25.4 mm
1’’
25.4 mm
1’’
top cabinet
template
top cabinet
template
Sample
This manual is suitable for devices