HP 15-f100 user manual download (Page 59 of 80)

Languages: English
You can view the full version and download it in PDF format.
Page 59 of 80
where you work. When your memory isn’t big enough to hold all your work easily, like a desk
overflowing with work, your productivity slows down. A great solution to improve performance is to
expand the amount of memory you have in your computer.
The computer has two memory module slots. The memory module slots are located on the bottom of
the computer under the service door. The memory capacity of the computer can be upgraded by
adding a memory module or replacing the existing memory module in one of the memory module
Before adding or replacing a memory module, make sure the computer has the most recent
BIOS version, and update the BIOS if needed. See
Updating the BIOS
on page
Failure to update the computer to the latest BIOS prior to installing or replacing a
memory module may result in various system problems.
To reduce the risk of electric shock and damage to the equipment, unplug the power
cord and remove all batteries before installing a memory module.
Electrostatic discharge (ESD) can damage electronic components. Before beginning any
procedure, ensure that you are discharged of static electricity by touching a grounded metal object.
If you are adding or replacing the memory module in your computer with a single memory
module, insert the memory module into the slot closest to the system board.
To use a dual-channel configuration with a second memory module, be sure that both
memory modules are identical.
To add or replace a memory module:
To prevent information loss or an unresponsive system:
Shut down the computer before adding or replacing memory modules. Do not remove a memory
module while the computer is on, in the Sleep state, on in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
Save your work and shut down the computer.
Disconnect all external devices connected to the computer.
Unplug the power cord from the AC outlet.
Turn the computer upside down on a flat surface.
Remove the battery from the computer (see
User-replaceable battery
on page
Remove the service door from the computer.
Loosen the service door screws
to release the door.
Improving performance