KitchenAid KEWD105HSS0 user manual download

You can view the full version and download it in PDF format.
Page 6 of 11
Timer Override
switch
The Timer Override switch allows you to run the unit past 4
hours, until it is turned off manually with the Power switch.
It is recommended
that the switch
be left in the OFF
position,
unless longer warming
times are required. When
the Override
switch
is in the ON position, the light on the
switch will illuminate
to notify that the Timer has been
bypassed.
IMPORTANT:
Although the Timer can be bypassed
by
using the Timer Override
switch,
never allow food items to
remain in the Warming
Drawer longer than one hour.
Bacterial
growth
may occur.
Moist-Dryslide
The Moist-Dry
slide allows you to open or close the vent
slots in the door. The MOIST setting holds the moisture
in.
The DRY setting allows steam/moisture
to escape from the
drawer.
To
keep
foods
moist,
put slide on MOIST, closing
vents. Closing the vents seals the drawer, keeping hot
food soft and moist.
NOTE: Condensation
may form on inner surfaces.
To
keep
foods
crisp,
put slide on DRY, opening
vents.
With the vents open the moisture
is released from the
drawer, keeping hot food crisp.
t__1
I1 ['_1'_}t _'} _
W _-/ "_
Dual level rack
The rack accompanying
your drawer
can be used in two
different
positions,
high and low.
Low position
raises the utensil
V2
inch from bottom of drawer.
High position
lets you stack items in the drawer.
To
stack
items:
Rack will fit from front to back or side to side.
NOTE:
When placing front to back, drawer
must
be
fully open.
It may be necessary
to cover some foods
and use a
higher temperature
setting with larger loads.
To warm both cooked
foods and empty
serving dishes
at the same time,
place the serving dishes on the
drawer
bottom during preheat and the food on the high
rack position after preheat.
Foods contained
in heat-safe glass or glass ceramic
utensils may require a higher temperature
setting than
food contained
in metal utensils.
Extra time should be allotted
for the drawer
temperature
to stabilize,
when adding
items or
checking
food.
Pans
The pans provided
can withstand
oven temperatures
and are approved
for oven cooking.
If not cooking
in pan, warm pans during
preheat time.
Food temperature
will fall below recommended
levels if
pan is not warm.
Ensure pan support
is properly installed
in Iocator
notch
before inserting
pans.
30" shown
(27" not shown)
1, Storage
notch
2, Locator
pan
support
NOTE:
27" model comes
with only 2 pans.
When not using pans, place Iocator pan support
in
storage
notch.
Sample