You can view the full version and download it in PDF format.
Page 22 of 32
You can select any of four tape lengths by pressing the
You can also enter the total possible recording time of
the tape manually.
For a C-64 tape (32 minutes on each side)
Press the REPEAT button.
The unit automatically programs tracks for side A and
side B separately considering the total time of the tape.
The programmed track numbers and the total number
of tracks for side A and B are displayed for a short
Start recording on the tape deck and press the
button at the same time.
The unit will pause at the end of side A of the
Turn the tape over to side B. Resume recording and, at
the same time, press the
It is recommended that you use a tape that is slightly longer
in length than the CD you are recording, because the
programmed tracks on a CD may not fit properly into the
time allowed on each half of the tape.
CD synchronized recording function can be used if your tape
deck is compatible with it. In this case, in step 5 and 6, press
button and then press the
Recording automatically starts. (For details, refer to page 17.)
TRACK PROGRAMMING FOR RECORDING
This convenient feature can be used to program tracks for
recording to tape. By only memorizing the total possible
recording time of the tape, the unit will automatically
program tracks or help you to program tracks so they will fit
onto the tape with the least amount of unrecorded space
remaining at each end of the tape.
The peak level searching function of this unit is useful for
adjusting recording level on the tape deck. (For details, refer
to page 22.)
Automatic Tape Programming
The unit will automatically program tracks on a disc with
the original order of tracks unchanged.
Stop the unit.
Select the disc.
Enter the total possible recording time of the
tape (tape length).
This manual is suitable for devices