JVC RC-BZ6BUJ user manual download (Page 9 of 39)

Languages: English
Pages:39
You can view the full version and download it in PDF format.
Page 9 of 39
7
English
Skip Play (
4
or
¢
)————————
During playback, press the
4
or
¢
button to select the
track you want.
The selected track starts playing.
Press and release the
¢
button to go forward one track at a
time.
Press and release the
4
button to go back one track at a time.
Search Play ————————————
During playback, hold down the
4
or
¢
button.
This operation will fast forward/backwards the CD so you can
quickly find a particular passage in the track you are listening to (the
CD is played slowly for a moment and then the playback speed in-
creases).
Locating a Track directly with the
Remote Control ——————————
Using the number keys on the Remote Control allows you can go
directly to the beginning of any track.
During playback, enter the number of the track you want
to listen to using the number keys.
The selected track starts playing.
Example: For track 5, press 5. For track 15, press +10 then 5.
For track 20, press +10, then 10. For track 32, press +10 three
times, then 2.
You can repeat one track or all the tracks on a CD.
During, or before playback, press the REPEAT button on
the Remote Control to select the Repeat mode.
The Repeat indicator changes with each press of the button, as
shown below.
=
ALL
=
blank display
=
(back to the beginning)
:
Repeats one track.
ALL
:
Repeats all the tracks.
To exit Repeat mode,
press the REPEAT button until the Repeat
indicator on the display goes out.
Repeat Play
■■
Using the Cassette Deck
(Listening to a Tape)
PLAY
(Display when using the Cassette Deck)
TAPE indicator/Analog clock
§
¡
1
8
The Cassette Deck allows you to play and record audio tapes
Notes:
The Cassette Deck performs best with normal tapes (metal or
CrO
2
tapes are not recommended).
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes
easily jam in the pinch-roller and the capstan.
One Touch Play (AC power only)
Just press the PLAY
button on the Unit. The power is au-
tomatically turned on, “TAPE” is displayed, and if a tape is already
in the deck, it will start to play.
1.Press the
§
STOP/EJECT button to open
the cassette holder.
2.Insert a cassette tape with the exposed
side facing upward as shown below.
3.Close the holder gently until it clicks.
4.Press the PLAY
button.
The tape is played and then stops when it reaches the end.
The TAPE indicator always turns to the right when the tape
is travelling.
To pause,
press the
8
PAUSE button on the Unit.
To cancel pause,
press the
8
PAUSE button again. Play contin-
ues from the point where it was paused.
To stop playing,
press the
§
STOP/EJECT button.
To remove the tape,
stop the tape, and press the
§
STOP/
EJECT button again.
Press the
1
(fast-forward) button on the Unit to
fast-forward the tape.
Press the
¡
(rewind) button on the Unit to re-
wind the tape.
The Cassette Deck automatically stops when the tape reaches
its end.
Playback
TAPE
+
Forward direction
To Fast-Forward and Rewind a
Tape
TAPE
Sample
This manual is suitable for devices