JVC HR-XVC21UJ user manual download

For Devices:JVC HR-XVC21UJ
Languages:English
Pages:64
You can view the full version and download it in PDF format.
Page 9 of 64
9
Inserting Batteries
1
2
3
Operation
• Aim the remote control at the remote sensor and press control buttons
to operate.
• Operate the remote control within 30
°
angle on either side of the remote
sensor, up to a distance of Approx. 5 meters.
Remote control
Replace the compartment
cover.
Install two “AA” batteries (supplied),
paying attention to the polarity
diagram in the battery compartment.
Open the battery compart-
ment cover in the direction of
the arrow.
Approx. 5 meters
Battery precautions
The precautions below should be followed when using batteries in this device:
1.Use only the size and type of batteries specified.
2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
To avoid a potential short circuit, insert the “–” end first.
3.
Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
Press
POWER
to turn the DVD/VCR on or off.
Make sure
TV/VCR/DVD
switch is set to VCR/DVD.
Tap
VCR CH +
or
VCR CH –
to move through the channels one channel at a time.
The
VCR CH
+/–
and
SET +/–
are also used to navigate on-screen menu system.
You can directly access specific channels using
Number keys
pad.
Each press of
VCR
or
DVD
, switches the screen between the VCR screen (VCR mode) and the DVD screen
(DVD mode).
Remote control basics
Sample