JVC HR-XVC21UJ user manual download

For Devices:JVC HR-XVC21UJ
Languages:English
Pages:64
You can view the full version and download it in PDF format.
Page 34 of 64
34
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
Duplicating a video tape/Duplicating a disc material onto a video tape
Load a blank cassette tape with the erase preven-
tion tab intact into the recording VCR.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
1
Press
SP/EP
to select the desired tape speed SP
or EP.
It is recommended that you set the speed to the
SP mode on the recording VCR for best results.
2
Press
VCR CH +
or
to select AUDIO/VIDEO input
position. “L” will appear in the
display.
3
Press
REC
on the recording VCR or on the Remote.
While holding
REC
, press
PLAY
.
Then press
PAUSE
.
4
Press PLAY button on the playback VCR or
CAMCORDER, then press PAUSE button.
5
Press
PAUSE
on both the VCRs simultaneously to
begin the duplicating process.
6
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup
is shown above.
To AUDIO (L) IN
To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
Recording VCR
To VIDEO IN
To AUDIO (R) IN
AUDIO/VIDEO cable (not supplied)
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
Connection with second VCR
Connection with Camcorder
Duplicating a video tape
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.
If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “
” will
appear on the screen for approx. 4 seconds. See page 37 for more information about the DVD playback.
Press
DVD
to select the DVD mode. (The DVD
indicator will light.)
1
Press
PLAY
to start the disc playback.
2
During disc playback, press
REC
on the VCR or
while holding
REC
, press
PLAY
on the Remote.
The duplicating will start.
3
Duplicating a disc material onto a video tape
Load a cassette tape with the erase prevention tab
intact.
Select the tape speed (SP or EP) in the VCR mode.
Load a disc you wish to duplicate.
Preparation:
You can set the duplicating time using the ITR-function.
At step
3
above press
REC
repeatedly until the desired
duplicating time appears on the screen (see page 30).
NOTE:
Sample