JVC HR-XVC21UJ user manual download (Page 31 of 64)

Languages: English
Pages:64
You can view the full version and download it in PDF format.
Page 31 of 64
31
3
Timer recording
Press
SET UP MENU
. Select the
TIMER REC SET option, then press
ENTER
.
Press
SET +
or
to select the date,
then press
ENTER
.
1
2
Press
SET +
or
to select one of the
program line, then press
ENTER
.
4
Make sure
TV/VCR/DVD
switch has been slided to VCR/DVD.
Then press
VCR
to select the VCR mode.
Load a cassette tape with the erase prevention tab intact.
Press
OSD
to verify time and date are correct (see pa
ge 29
).
Preparation:
Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.
Set the
start time
,
end time
,
channel
and
tape speed
as in step
3
.
Example:
Program a timer recording for the 26th day, channel 125
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP).
NOTES:
If the programmed start time is over the
present
time, the program will be canceled
after pressed
ENTER
.
5
To enter other programs, repeat step
2
through
4
.
To return to the normal screen,
press
SET UP MENU
twice.
6
Press
TIMER
. The clock symbol (
) will appear on the
display and the VCR stands by for recording. At the same
time, VCR mode will change to DVD mode automatically. You
can use DVD even if the VCR is in the timer recording mode.
If you do not use the DVD, turn the power off.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
If the clock symbol (
) does not appear on the display in spite
of the pressing of
TIMER
, the cassette may not have been
loaded yet (see page 24).
If the cassette is ejected in spite of the pressing of
TIMER
, the
erase prevention tab of the cassette may have been
removed
(see page 24).
NOTES:
If the clock symbol (
) blinks when
the timer recording ended, the TV
program has not been completely
recorded because of an insufficient
tape supply. In this case, press
TIMER
to cancel the timer program or press
EJECT
to remove the cassette tape.
During timer recording standby mode,
the VCR mode cannot be selected. To
use the VCR, press
TIMER
at first,
then press
VCR
to change to VCR
mode. After you use the VCR, press
TIMER
again to put the VCR into timer
recording standby mode.
If you press
TIMER
during timer
recording, the recording operation will
be interrupted. If you press
TIMER
again within the programmed time, the
recording operation will start again.
After a power failure or disconnection
of the power plug, all programmed
recording settings and time display
will be lost upon resumption of power.
In this case, reset the clock (see pages
21-23) and reprogram any timer re-
cordings.
Press
CANCEL
to move cursor backward for correction.
To record from external source set the channel to “L”. “L” will appear
next to CH 125 (or 69).
Sample
This manual is suitable for devices