Denon DN-500C user manual download (Page 16 of 38)

Languages: English
Pages:38
You can view the full version and download it in PDF format.
Page 16 of 38
10
Playing CD
POWER
SOURCE
0-9
5
1
/
3
PITCH ON/OFF
PITCH ADJUST (+/−)
MASTER
KEY
1
Press
POWER
to turn on power to the unit.
2
Press
SOURCE
until the source indicator for “CD”
is lit.
3
Press
5
to open the disc tray and insert the disc.
4
Press
1
/
3
.
The
1
indicator lights.
The disc tray closes and playback starts.
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.
The CD tray automatically will close in approximately 30 seconds.
n
Playing a specific track
Press
0
9
to select the track.
G
Example
H
: Track 4
: Press
4
.
G
Example
H
: Track 12
:
Press
1
and
2
in succession (within about
0.5 seconds).
n
Adjusting the playback tempo
1
Press
PITCH ON/OFF
.
The LED indicator lights.
2
Press
PITCH ADJUST (+/−)
.
+: Faster
−: Slower
Up to ±16% can be adjusted by ±0.1%.
When you press
PITCH ADJUST(+)
and
(-)
at the same time, the
original speed.
Keeping the original key in pitch-adjusted playback
Press
MASTER KEY
to turn on the indicator.
The display shows the pitch in BPM (beats per minute). If you do not
want to display it, change “BPM Disp” in menu items (
v
page 18
)
to “Off”.
Selector knob
1
/
3
2
MENU
PROGRAM
CLEAR
n
Using the track end notice function
(EOM: End Of Message)
This function flashes the time bar in the display to inform you that
the current track is drawing to an end. This function can be turned
on or off and the duration of flashing can be set in the following
steps.
1
Press
MENU
.
2
Turn the selector knob to select “EOM”, then press
the selector knob.
3
Turn the selector knob to select the item (Off / 10 /
15 / 20 / 30 / 60 / 90).
To disable this function, select “Off”.
4
Press the selector knob to enter your selection.
5
Press
MENU
to exit.
Information
Operations
Preparations
Sample
This manual is suitable for devices