Ge ADW1100N10BB user manual download (Page 8 of 16)

Languages: English
Pages:16
You can view the full version and download it in PDF format.
Page 8 of 16
Operation
of
electronic
models
(model
GSD4000
Only)
Using the Dishwasher Door
door must be closed and locked into place to select a
LOAD SELECTION
or an
OPTION.
Ifthe door is openedduring a cgcleand left open,
the dishwasherwill beeponce
every30 secondsuntil the
door is cosed and archedinto p ace.
Start
Close and latch the doon Touch the
START/RESET
pad to begin the cycle. Water fill begins and
approximately
60 seconds later the wash action begins.
NOTE:
The dishwasher remembers your last cgcle so you don't have to reprogram each time. When
the dishwasher is loaded and the door latch is in the locked position, the control panel lights will be
ON
and displag the last settings you selected.
If you don't want to change ang of the settings, simply touch the
START/RESET
pad to begin
the cycle.
Also, if a power failure occurs, NORMAL and
HEATEDDRY
will automatically
be programmed.
Hake any new selections and touch the
START/RESET
pad to begin the cycle.
Clean
This light is illuminated when a wash cgcle is complete. The light will stag
ON
until the door is opened.
Flashing Displag Lights
Lights
What
It
Means
What
To Do
This is normal.
Allow the dishwasher
to drain and reset before you start a new
The
START/RESET
pad
wash cycle.
has been pressed.
Control Error
CLEAN
Pressthe
START/RESET
pad to turn off the beeper If the
CLEAN
light continues to flash, call for service.
PLUS A
BEEPING
SOUND
a
Asj
PLUS A
BEEPING
SOUND
Control Error
Pressthe
START/RESET
pod to turn off the beeper and the
dishwasherwill attempt to reset. Restartthe wash cgcle.
If this error continues,turn off the power to the dishwasher at
the circuit breaker for 30 seconds.Try the dishwasheragain.
If the error is still present,call for service.
8
Sample