Lynx L27 (2005) user manual download (Page 31 of 42)

Languages: English
Pages:42
You can view the full version and download it in PDF format.
Page 31 of 42
Lynx Side Burners
& Grill Extender
MOUNTING
THE
SIDE
BURNER
/
GRILL
EXTENDER
TO A CART
(continued)
7b.
When mounting
the ProSear Grill Extender
(LPSGE)
or Side Burner (LSB1
/
LSB2)
to a 27" or 36" freestanding
grill the plumbing
must thread through the hole second from the rear
of the cabinet.
Use the hole cover included with LPSGEBKT
to cap the hole closest to rear of
cabinet.
Important
Note:
Make certain that the flex line is not bound, kinked or pinched before
proceeding.
8.Be certain that the outer flange of the ProSear Grill Extender
(LPSGE) or Side Burner (LSB1
/
LSB2) is overhanging
the cabinet and that the screw holes are properly aligned on all sides.
9.Insert
(3) 1¼-20 screws into the outer flange on the side that does not receive the mounting
bracket (opposite
the plumbing outlet)
and (1) 1¼-20 screw
into the rear outer flange to secure
to the cabinet to the chassis.
10.Locate the "cart-mounting
bracket" (Note:
27" and 36" grills require an alternate
bracket/
LPSGEBKT
for mounting)
and align the (5) screw holes on bracket with the (5) screw
holes on
side of cabinet.
Secure the bracket to the cabinet and chassis with (5) 1¼-20 screws.
Leave all
screws
loose but snug until proper alignment
is achieved.
11.REQUIRED
FOR SIDE BURNER
CART MOUNTING
ONLY - Locate lower stabilizing
bracket
(labeled
'Side Burner Only') and place into position
show in step #5 of Side Burner diagram.
Make certain that upper flange of stabilizing
bracket is positioned
inside (above) bottom rail of
Side Burner. Secure with (4) 1¼_ 20 screws
12.Tighten all remaining
screws.
30
Sample