Coleman 9944-851 user manual download (Page 5 of 40)

Languages: English
Pages:40
You can view the full version and download it in PDF format.
Page 5 of 40
• Place
thegrill
onto
the
stove.
• Place
griddle
ateither
endofthestove
with
drain
slot
atendofstove.
• Ifusing
thestove
onatable-top,
allow
thebaseofthepropane
cylin-
der
torest
onthesurface
ofthetable-top.
Donot
use
thepropane
cylinder
support.
• Ifusing
thestove
with
itslegs,
pull
upand
rotate
bottle
support
assembly
until
support
wire
isperpendicular
tostove
case.
• Proper
location
oftheburner
with
respect
totheorifice
isimportant.
Toverify
theproper
installation
oftheburner
tube,
remove
thewater
panand
lookdownward
through
theopening.
Theburner
tubemust
belocated
over
thebrass
orifice
fitting.
• Check
andclean
the
burner/venturi
tubes
for
insects
and
insect
nests.
A
clogged
tubecan
lead
toafire
beneath
theappliance.
Burner
Tube
• Perform leak test outdoors.
• Extinguish all open flames.
• NEVER leak test when smoking.
• Do not use the outdoor stove until connection has been leak test-
ed and does not leak.
NOTE: Use Coleman t6.4 oz disposable propane cylinders. The LP
gas cylinder(s) used with stoves must be constructed and marked in
accordance with the specifications for LP-gas cylinders of the U.S.
Department of Transportation or
Transport Canada,
CAN/CSA B339,
Cylinders,
Spheres and Tubesfor the Transportation of Dangerous
Goods.
Step
1
Make sure burner valve is
off.
Step 2
Remove plastic cap from
top of propane cylinder. Save
cap for use in storing. Screw
propane cylinder into REGU-
LATOR.Be careful not to
cross-thread. HAND TIGHTEN
only.
Step 3
Check the connection
between the cylinder and
the regulator with soapy
water. Bubbles indicate a
leak. Check that the con-
nection is not cross-thread-
ed and that it is tight.
Perform another leak check.
If there is still a leak,
remove the cylinder and
contact Coleman for service
or repairs.
Leak
Check
• The regulator uses a
threaded fitting to attach
to the stove. It is neces-
sary to hold the stove to
make sure the fitting is
seated. Align the regula-
tor to the fuel tube on
the rear of the stove and
push on. Screw on the
outer threaded sleeve
in a clockwise direction
until tight.
Step 4
Never operate stove with
propane cylinder in an invert-
ed position.
O
Sample
This manual is suitable for devices