GoldStar R5003 user manual download (Page 8 of 11)

Languages: English
Pages:11
You can view the full version and download it in PDF format.
Page 8 of 11
WindowRequirements
NOTE: All supporting parts should be secur_
to firm wood, masonry, or metal.
1. This unit is designed for installation in standard double hung windows with actual opening widths of
22" to 36"
The upper and lower sash must open sufficiently to allow a clear vertical opening of 14"
from the bottom of the sash to the window stool.
2.If storm window presents interference, fasten a 2" wide wood strip (OUTER SILL) to inner window
sill across the full width
d
the sill. The wood strip should be thick enough to raise the height of the
window sill so that the unit can be installed without interference by the storm window frame.
See Fig. 5-2. Top of:wood strip should be approximately 3/4" higher than the storm window frame
(STORM WINDOW
FRAME) or wood strip (OUTDOORS) to help _ndensation
to drain properly to
the outside.
3. Install a second wood strip (approximately
6" long by 1-1/2" wide and same thickness as first strip)
in the center of the outer sill flush against the back off the inner sill. This will raise the L bracket as
shown Fig. 5-2
4. if the distance beh,Ā¢eenSTORM WINDOW
FRAME and WOOD STRIP MOUNTED
ON TOP OF
INNER SILL is more than 1'_,two of wood strip are not necessary
iNNER
WOOD STRIP MOUNTED
1" MAX.
Fig.
_1
Fig.
_2
HARDWARE
]
TYPE A: 1lEA
TYPE B: 4EA
TYPE
C: 3EA
.....
(SHORT SCREW)
.
(W_D
SCREW)
.
(L BACKET)
TYPE D: 1EA
TYPE E: 1EA
TYPE F: 2EA
(SEAL STRIP)
(SASH SEAL)
(GUIDE
PANEL)
(Adhesive backed)
(Notadhesivebacked)
Sample