GoldStar LXA1230ACL user manual download

You can view the full version and download it in PDF format.
Page 5 of 15
Bectrical
Data
Electrical Data(For 115V model)
Line Cord Plug
Use Wall Receptacle
Power Supply
Parallel
Standard
125V, 3-wire
grounding
receptacle
rated
15A, 125V AC
Use 15 AMP
time
delay fuse or 15 AMP
circuit
breaker.
USE OF EXTENSION CORDS
Because of potenti_ safety hazards, we strongly discourage the use of an extension cord. However, if you wish to
use an extension cord, use a CSA certified!UL-Hsted3-wire (grounding)
extension
cord, rat_
15A, 125V.
Electrical Data(For230/208Vmodel)
Line Cord Plug
Use Wall Receptacle
Power Supply
Do
not under
an€
Jrcumstance,s
cut
r remove
the
rounding prong
rom the
p_ug.
)
supply
cord
with
3-prong
grounding
plug
_-q
fDo
not under
any"
_
//
circumstan_s
cut
_//,,._
or remove
the
_.._
[ grounding
prong
"-_J
E from
the
pUug
Power
supply
cord
with
3-prong
grounding
plug
Tandem
Standard
250V,
3-wire
grounding
receptacle
rated 15A, 250V
AC
Standard
250V,
3-wire
grounding
receptacle
rated 20A, 250V
AC
Use 15 AMP
time delay fuse or
circuit
breaker.
Use 20 AMP
time delay fuse or
circuit
breaker.
Refer to the nameplate
for correct
fusing.
All wiring
should
be made
in accordance
with
local
electrical
codes
and regulations.
NOTE
Aluminum
house wiring
may pose sp_ial
problems.
Consult a qualified
electrician.
[]
ELECTRICAL SAFETY
IMPORTANT
GROUNDING INSTRUCTIONS
Air conditioner
has a three-prong grounding plug
on its power supply cord, which must be plugged
into properly grounded three-prong wall
receptacle for your protection against possible
shock h_ard.
FUSE
-
Use a time-delay fuse or circuit breaker.
Refer to the nameplate for proper power supply
requirements.
208, 230,
and
208/230 VOLT UNITS
These units are equipped with a three-prong
grounding plug on the power supply cord, which
must be plugged into a matching properly
grounded three-prong wall receptacle for your
protection against possible shock h_ard.
If such
an outlet is not present, one must be installledby a
qualified electrician in accordance with the National
Electrical Code and local codes and ordinances.
NOTE:
DO NOT USE AN EXTENSION CORD
ON 20& 230, AND 208/230 VOLT UNITS.
Sample