Ge AEN08LPQ1 user manual download (Page 9 of 52)

Languages: English
Pages:52
You can view the full version and download it in PDF format.
Page 9 of 52
Installation
Instructions
[]
WINDOW
REQUIREMENTS
• These instructions
are for a standard
double-hung
window. You will need to modify
them for other types of windows.
CAUTION: Ifthesill
support
bolts do not contact
the window
sill, or
if you hove u window
without
u sill, you
must order accessory
kit RAK87 to
properly
install this air conditioner.
Cull 800.626.2002
or visit GEAppliunces.com.
The air conditioner
can be installed
without
the accordion
panels
if needed
to fit in a
narrow
window.
See the window
opening
dimensions.
All supporting
parts
must
be secured
to firm wood,
masonry
or metal.
The electrical
outlet
must
be within
reach of
the power
cord.
I
B==t]
I
14.5" min.
22.6"
to
38.1"
(With accordion
panels)
t"
I
IY1
STORM WINDOW
REQUIREMENTS
A storm window
frame will not allow the air
conditioner
to tilt toward
the outside, and will keep
it from draining
properly. To adjust for this, attach
a piece of wood to the sill.
WOOD
PIECES -
WIDTH:
2"
LENGTH: Long enough
to fit inside the window
frame.
THICKNESS:
To determine
the thickness,
place a
piece of wood
on the sill to make
it 1/2" higher
than the top of the storm
window
frame
or the
vinyl frame.
Attach
securely
with
nails or screws
provided
by the installer.
1/2" higher
than storm
window
frame
Storm window
frame
1/2" higher
than
vinyl frame
___
_ (on some
windows)
L-
S
Wood
-
r v
Vinyl frame
I
I
I_
REMOVE THE AIR CONDITIONER
FROM THE CASE
I'_
Remove
and save the 2 screws
from
the lower
sides of the front
grille.
%
FRONT
Grasp the lower
corners
of the grille while
pressing
in on the case sides with
your
finger
tips. Pull out to release and lift it up.
NOTE: Do not pull the bottom
edge toward
you
more
than
3" or you may damage
the tabs of
the grille.
t
t
FRONT
El
When the front
grille is removed
the control
panel
will still be attached
by a harness. Turn
the grille around
so you can see the back
side of the grille.
Remove
the three
screws
to
separate
the control
panel housing
from
the
grille.
rDl
Remove
the ground
screw
from
each side of
the case. Keep them
in a safe location.
NOTE:
Be sure to save these
screws.
You will
need them
later
in the installation.
FRONT
Sample
This manual is suitable for devices